Introduction
You've just received your David & Clément wall-mounted bike rack and you want to install it quickly? Here's the ultra-fast guide for installation in less than 10 minutes.
What you need
- A drill (with a drill bit suitable for your wall)
- A spirit level (or the level app on your smartphone)
- A pencil
- A screwdriver or Allen key (included in the box)
- The provided hardware (wall plugs + screws)
Minute 1-2: Choose the location
Decide on the height and position. For a wheel rack, the center of the wheel should be 1.30-1.50 m from the ground. Mark the center point with a pencil.
Minute 3: Position the rack
Place the rack against the wall, center it on your mark. Check for horizontal alignment with the level. Mark the drilling points with a pencil.
Minute 4-5: Drill
Drill at the marked points with the drill bit suitable for your wall. Depth: length of the wall plug + 5 mm. Blow away the dust.
Minute 6: Insert the wall plugs
Insert the provided wall plugs into the holes. They should go in easily by hand or with light taps of a hammer.
Minute 7-8: Fix the rack
Position the rack and screw in the provided screws. Do not overtighten. Check the horizontal alignment again.
Minute 9: Test
Pull firmly on the rack in all directions. It should not move. If it does, slightly tighten the screws.
Minute 10: Hang your bike
Hang your bike and admire the result. Your space has just been transformed.
Conclusion
10 minutes to transform your space. That's the promise of David & Clément — and we deliver.