What You'll Need
- Power drill with masonry or wood bits
- Spirit level
- Pencil and tape measure
- Rawl plugs (included with your rack)
- M6 bolts (included)
Before You Start
Identify your wall type — brick, concrete, or stud wall. Use a stud finder or a simple knock test. Never mount a bike rack into plasterboard alone; always locate a stud or use specialist hollow-wall anchors rated to the full bike weight.
Step-by-Step Installation
- Mark your fixings: Hold the bracket against the wall at the desired height (we recommend 1.5–1.7 m from floor to bracket base). Use a spirit level and pencil to mark all four fixing holes.
- Drill the holes: Use the correct drill bit for your wall. For brick or concrete, use a masonry bit (8 mm). Drill to the depth of your rawl plug.
- Insert rawl plugs: Tap them flush with the wall surface.
- Attach the bracket: Align the bracket with the holes and hand-tighten the bolts. Check level again before fully tightening.
- Test before loading: Apply firm downward pressure on the bracket before hanging your bike.
Tips for UK Homes
Victorian and Edwardian terraces often have solid brick walls — ideal for our racks. Modern new-builds with dot-and-dab plasterboard require extra care; always locate the metal stud or use heavy-duty cavity fixings rated to at least 50 kg per fixing point.
Need Help?
Our customer team is available Monday to Friday. Drop us an email and we'll guide you through the installation for your specific wall type.